Application
STM-PW series high temp. water heaters are mainly used for mold heating and mold temperature maintaining. Besides, it is also applicable to fields with other similar demands. Compared with the STM-W water heater, this series is able to meet wider production demands under higher heating temperature (180°C) condition. Besides, there are many options and accessories for this series of machine that can meet different production demands.
Features
• For standard STM-PW, the maximum heating temperature is 180°C/356°F. Adopt SSR solid-state relay controller.
• Adopt plate heat exchanger for direct cooling and accurate temperature control, and the low water viscosity makes quick heat exchange.
• P.I.D controller with 3.2" LCD with a user-friendly interface. The multi-stage controller can maintain stable mould temperature with a precision of +/-0.5°C/0.9°F.
• In build weekly timer with°C/°F. unit conversion.
• In build multiple safety with display and alarm buzzer, such as reverse phase, pump overload, overheat, and low water pressure.
• Built-in magnetic pump without seal.
• RS485 communication interface achieves centralized monitoring with the host.
• Equipped with water level probe and high-pressure plunger pump that could accurately detect the water level, and refill during high-pressure as to avoid empty water system.
Options
• For models optional with magnetic filter to prolong the service life the magnetic pump, and add "MF" at the end of the model code.
• For models optional with mold temperature and mold return water temperature display, and add "TS" at the end of the model code.
• For models optional with manual air-blowing function, add "MA" at the end of the model code.
For inquiries and orders – HERE
Video - HERE
KRASCO
Did you like the article?
Please rate it with the stars below.